The new Rollenband AT is a hinge system that can be adapted to all common door frame systems. Its roller diameter of 20 mm meets the high design standards, which building owners and architects have for ensuring that hinges on their residential and commercial doors are as unobtrusive as possible. It can be adjusted in six directions. The adjustment takes place inside of the hinges. The well-designed hinge contour is retained even in case of extreme adjustment. The largely pre-assembled hinge is quick and easy to install.
A one-piece bearing pin made of stainless steel ensures a high level of stability. This is designed in such a way that the door can be easily removed even in case of a low lintel. The bearing point made of a special high-quality material is almost abrasion-free even with doors that are very heavy and subject to frequent use and thus requires no maintenance by facility management.
The Hahn Rollenband AT is a system-adapted hinge which was developed in close co-operation with door manufacturers. Different door/frame combinations require special solutions.To help us process your enquiry and order, we require accurate information about the respective door/frame combination to be used.
Made of extruded aluminium
Direct installation with screws
Depending of profile section design max. 180 kg
Without raising or removing the door adjustable in 6 directions: Horizontal adjustment ± 1.5 mm (the adjusting range can vary depending on the installation Situation), vertical adjustment ± 3 mm, sealing pressure adjustment ± 0.3 mm
CE-certified according to EN 1935:2002, hinge class 14
Hinges deliverable in anodised colours and RAL-colours.
Rollenband AT: 4 7 7 0 1 4 1 14
Class 4: Very heavy usage. Hinges for doors that are subject to frequent and heavy usage.
Class 7: 200,000 test cycles (only door hinges)
weight of test door
Class 7: Weight of test door 160 kg
class 0: not suited for use on fire and smoke-retardant doors (EN 1634-1)
safty of use
The fundamental requirements on the safety of use must be fulfilled by all hinges. That's why there is only class 1 here.
class 4: Corrosion resistance
Class 1: Suited for use on intrustion-resistant doors based on the rating of the hinges' contribution to intrusion resistance for the respective intrusion-resistant door.
Class 14: Hinges of this class fulfil demands due to very heavy usage
Serie 60 AT, 2-piece
Serie 60 AT, 3-piece
Türband 4 AT, Half measure 0
TÜRBAND 4 AT, 2-PIECE
TÜRBAND 4 AT, 3-PIECE
KLEMMBAND NG, 2-PIECE SMALL
KLEMMBAND NG, 2-PIECE LARGE
KLEMMBAND NG, 3-PIECE
By means of the instructions app, Dr. Hahn provides customers with allavailable adjustment instructions ina user-friendly way. Through intuitiveuse and easy one-handed control, thedesired instructions are quickly found. Paper copies or an Internet connectionare no longer required.DOWNLOAD